Toyota Celica 2005 Repair Manual page 2231

BE−56
Returns
Slowly
Returns
Quickly
2
2005 CELICA (RM1131U)
BODY ELECTRICAL
INSPECTION
2
1
1.
(a)
(b)
I14288
(c)
(d)
HINT:
Do not tilt the retractor.
If the operation is not as specified, replace the front seat outer
belt assembly.
I14289
2.
(a)
1
(b)
If operation is not as specified, replace the seat belt inner.
I14290
− ELECTRIC TENSION REDUCER SYSTEM
INSPECT TENSION REDUCER SOLENOID OPERA-
TION
Connect the battery positive (+) lead to terminal 1 and the
battery negative (−) lead to terminal 2.
Pull the belt upward and check that the belt is slowly re-
tracted when released.
Disconnect the lead from the battery.
Pull the belt upward and check that the belt is retracted
quicker than in (b) when released.
INSPECT BUCKLE SWITCH CONTINUITY
Check that there is a continuity between terminals of the
switch side connector with the switch ON (belt fastened).
Check that there is no continuity between terminals of the
switch side connector with the switch OFF (belt unfas-
tened).
2230
BE0PC−04