RS−40
SUPPLEMENTAL RESTRAINT SYSTEM
2005 CELICA (RM1131U)
−
SIDE AIRBAG ASSEMBLY
REMOVAL
NOTICE:
If the wiring connector of the SRS is disconnected
S
and the ignition switch is at ON position, DTCs will be
recorded.
Never use the airbag parts from another vehicle.
S
When replacing parts, replace them with new parts.
1.
REMOVE FRONT SEAT
(a)
Remove the 2 seat track covers and 4 bolts.
(b)
Disconnect the side airbag connector.
NOTICE:
When handling the airbag connector, take care not to dam-
age the airbag wire harness.
(c)
Remove the front seat.
2.
REMOVE RECLINING ADJUSTER RELEASE HANDLE
3.
REMOVE RECLINING ADJUSTER KNOB
H12000
4.
REMOVE FRONT SEAT CUSHION SHIELD
H12634
5.
REMOVE INNER FRONT SEAT CUSHION SHIELD
Remove the screw and inner front seat cushion shield
6.
REMOVE SEAT CUSHION ASSEMBLY
(a)
Remove the wire harness from the seat cushion assem-
bly.
NOTICE:
When handling the airbag wire harness, take care not to
damage the airbag wire harness.
H12635
(b)
Remove the 4 bolts and seat cushion assembly.
H11974
2140
RS0K3−02