Toyota Celica 2005 Repair Manual page 1556

2005 CELICA (RM1131U)
SFI − THROTTLE BODY (1ZZ−FE)
REMOVAL
1. DRAIN ENGINE COOLANT
2. DISCONNECT ACCELERATOR CABLE
3. REMOVE NO. 2 CYLINDER HEAD COVER
4. REMOVE AIR CLEANER HOSE AND CAP WITH MAF
METER
(a) Disconnect the VSV for EVAP.
(b) Disconnect the 2 air hoses from air cleaner cap.
(c) Loosen the air cleaner hose clamp bolt.
(d) Disconnect the mass air flow meter connector.
(e) Disconnect the 3 air cleaner cap clips.
(f) Disconnect the air cleaner hose from the throttle body,
and remove the air cleaner cap together with the air clean-
er hose.
5. REMOVE THROTTLE BODY
(a) Disconnect the throttle position sensor connector.
(b) Disconnect the IAC valve connector.
(c) Disconnect the PCV hose from throttle body.
B09177
(d) Remove the 2 bolts and disconnect the No. 2 water by−
pass pipe.
B09178
(e) Disconnect the 2 water by−pass hoses.
B09176
1555
SF−35
SF09R−05