Toyota Celica 2005 Repair Manual page 2325

Centering Bolt
SST
2005 CELICA (RM1131U)
Standard Bolt
N03433
H06194
H06195
N17571
H12662
BODY − FRONT DOOR
ADJUSTMENT
1. FRONT DOOR ADJUSTMENT
HINT:
Since the centering bolt is used as the door side hinge bolt, the
door hinge cannot be adjusted with it on. Substitute the bolt with
washer for the centering bolt.
(a) Adjust the front door in forward/rearward and vertical
directions.
Using SST, adjust the door by loosening the body side
hinge bolts.
SST 09812−00010
Torque: 25 N·m (260 kgf·cm, 19 ft·lbf)
(b) Adjust the front door in left/right and vertical directions.
Adjust the door by loosening the door side hinge bolts.
Torque: 25 N·m (260 kgf·cm, 19 ft·lbf)
(c) Adjust front door lock striker.
(1) Check that the door fit and door lock linkages are
adjusted correctly.
(2) Adjust the striker position by slightly loosening the
striker mounting screws and hitting the striker with
a hammer.
(3) Tighten the striker mounting screws again.
Torque: 23 N·m (230 kgf·cm, 17 ft·lbf)
2. ADJUST FRONT DOOR GLASS
(a) Adjust the upper part of the glass inward/outward.
(1) Remove the bolt and lower plate.
(2) Pull the lower plate so that the snap is unlocked.
(3) Remove the snap and lower plate.
(4) Adjust the glass by turning the setting nut.
(5) Reinstall the lower plate, snap and bolt.
Torque: 4.9 N·m (50 kgf·cm, 43 in.·lbf)
2324
BO−19
BO1DM−06