(1)
(2)
(3)
SST
Slit
Exhaust
Intake
Side
Side
2005 CELICA (RM1131U)
ENGINE MECHANICAL
−
(c)
Install the valve (1), valve spring (2), and spring retainer
(3).
A23921
(d)
Using SST, compress the valve spring and place the 2
keepers around the valve stem.
SST
A01061
(e)
Using a plastic−faced hammer and the valve stem (not in
use) tip wound with vinyl tape, lightly tap the valve stem
tip to ensure a proper fit.
NOTICE:
Be careful not to damage the valve stem tip.
3.
INSTALL VALVE LIFTERS
(a)
Install the valve lifter.
(b)
Check that the valve lifter rotates smoothly by hand.
4.
2ZZ−GE:
A07307
INSTALL VALVE ROCKER ARM
(a)
Set the 8 valve rocker arms.
(b)
Install the rocker No. 1 and No. 2 shaft with the 2 bolts.
Torque: 7.5 N·m (76 kgf·cm, 66 in.·lbf)
HINT:
Position the slit of the locker shaft in the direction shown
S
in the illustration.
Align the locker shaft end with the cylinder head end.
S
5.
2ZZ−GE:
INSTALL OIL CONTROL VALVE HOUSING
(a)
Install the oil control valve filter.
(b)
Install the gasket and oil control valve housing with the 3
bolts and 2 nuts.
A10370
Torque: 9.0 N·m (92 kgf·cm, 80 in.·lbf)
1450
CYLINDER HEAD
09202−70020 (09202−00020)
EM−65