Toyota Celica 2005 Repair Manual page 1825

MX−52
1.9 ± 0.3 mm
2005 CELICA (RM1131U)
MANUAL TRANSAXLE (C60)
7.
(a)
D07374
(b)
SST
(c)
D07372
(d)
SST
NOTICE:
When replacing the tapered roller bearing outer race, re-
place the tapered roller bearing along with it.
D07373
(e)
SST
(f)
D08249
− DIFFERENTIAL CASE
Transaxle case side:
IF NECESSARY, REPLACE OIL SEAL AND TAPERED
ROLLER BEARING OUTER RACE
Using a screwdriver and hammer, drive out the oil seal.
Using SST, pull out the tapered roller bearing outer race
and spacer.
SST 09612−65014
Place the spacer into the differential case.
Using SST and a press, install the tapered roller bearing
outer race.
SST 09950−60020 (09951−00680), 09950−70010
(09951−07150)
Using SST and a hammer, drive in a new oil seal.
SST 09710−28021 (09710−08041)
Drive in depth: 1.9 ± 0.3 mm (0.075 ± 0.012 in.)
Coat the lip of the oil seal with MP grease.
1824