Toyota Celica 2005 Repair Manual page 1464

EM−78
2005 CELICA (RM1131U)
ENGINE MECHANICAL −
(b) Disconnect the 2 heater hoses from the engine side.
(c) Disconnect the brake booster vacuum hose.
19. M/T:
DISCONNECT CLUTCH RELEASE CYLINDER
(a) Remove the 3 bolts, and disconnect the brackets from the
transaxle.
(b) Remove the 2 bolts, and disconnect the release cylinder
from the transaxle.
20. DISCONNECT TRANSAXLE CONTROL CABLE (S)
21. DISCONNECT 2 GROUND CABLES
22. REMOVE DRIVE SHAFT (See page SA−21)
D07380
23. REMOVE EXHAUST PIPE
(a) Disconnect the 2 heated oxygen sensors.
A10430
(b) Remove the 4 bolts and springs.
(c) Disconnect the 2 O−rings, and remove the exhaust pipe
and 2 gaskets.
A10431
24. 1ZZ−FE:
REMOVE EXHAUST MANIFOLD
(a) Remove the 4 bolts and upper heat insulator.
(b) Remove the 3 bolts and exhaust manifold stay.
(c) Remove the 5 nuts, exhaust manifold and gasket.
A21004
1463
ENGINE UNIT