Toyota Celica 2005 Repair Manual page 1802

REASSEMBLY
Reassembly is in the reverse order of disassembly. (See page MX−13)
NOTICE:
When working with FIPG material, you must observe the followings.
Using a razor blade and gasket scraper, remove all old FIPG material from the gasket surfaces.
S
Thoroughly clean all components to remove all loose material.
S
Clean both sealing surfaces with a non−residue solvent.
S
Apply FIPG in an approx. 1 mm (0.04 in.) wide bead along the sealing surface.
S
Parts must be assembled within 10 minutes of application. Otherwise, the FIPG material must
S
be removed and reapplied.
HINT:
Coat all of the sliding and rotating surfaces with gear oil before reassembly.
2005 CELICA (RM1131U)
MANUAL TRANSAXLE (C60) − MANUAL TRANSAXLE ASSEMBLY
1801
MX−29
MX01I−05