Protective Tape
Adhesive Tape
2005 CELICA (RM1131U)
BODY
REMOVAL
Adhesive Tape
1.
(a)
(b)
NOTICE:
Do not heat the moulding excessively.
H12581
(c)
HINT:
Tape the screwdriver tip before use.
N18625
2.
(a)
(b)
NOTICE:
Do not damage the body with the knife.
−
ROOF SIDE MOULDING
REMOVE ENDS OF MOULDING
Apply protective tape to the outer surface as shown in the
illustration to keep the surface from being scratched.
Using a heat light, heat the moulding to 20 − 30°C (68 −
86°F).
Using a scraper, pull off the roof side moulding from the
front end and rear end.
REMOVE MOULDING AND ADHESIVE
Pull off the moulding by cutting the adhesive with a knife
at the front and rear ends.
Remove the moulding.
2348
BO−43
BO2NP−02