Toyota Celica 2005 Repair Manual page 2387

Driver's Side:
7 Clips
2 Clips
2005 CELICA (RM1131U)
BODY − INSTRUMENT PANEL
18. REMOVE END FINISH PANELS
(a) Driver's side:
Remove the 2 screws.
(b) Passenger 's side:
Remove the screws.
(c) Using a screwdriver, remove the end finish panels.
HINT:
Tape the screwdriver tip before use.
H12624
19. REMOVE CENTER CLUSTER FINISH PANEL WITH
HEATER CONTROL NAME PLATE
(a) Remove the heater control knobs.
(b) Remove the 4 screws.
(c) Using a screwdriver, remove the center cluster finish pan-
el with heater control name plate, then disconnect the
connector.
HINT:
Tape the screwdriver tip before use.
H12625
(d) Remove the 4 screws and clock from the center cluster
finish panel.
(e) Remove the 2 screws and heater control name plate from
the center cluster finish panel as shown in the illustration.
20. w/ Radio:
REMOVE RADIO
21. w/o Radio:
REMOVE STEREO OPENING COVER ASSEMBLY
22. REMOVE HEATER CONTROL AND ACCESSORY AS-
SEMBLY (See page AC−66)
23. REMOVE STEERING COLUMN (See page SR−13)
H12626
24. REMOVE FRONT PILLAR GARNISH
(a) Using a screwdriver, remove the front pillar garnish.
HINT:
Tape the screwdriver tip before use.
(b) Employ the same manner described above to the other
side.
25. REMOVE FRONT DOOR OPENING TRIM
H12584
2386
BO−81