Toyota Celica 2005 Repair Manual page 1867

AX−34
A
A
B
2005 CELICA (RM1131U)
AUTOMATIC TRANSAXLE (U240E)
25.
D05872
26.
Loosen the 2 clips and disconnect the 2 oil cooler hoses.
27.
D05873
28.
Turn the crankshaft to gain access and remove the 6 bolts hold-
ing the crankshaft pulley set bolt with a wrench.
HINT:
At the time of installation, please refer to the following item.
First install black colored bolt and then 5 other bolts.
D05874
29.
(a)
B
(b)
D05894
− AUTOMATIC TRANSAXLE UNIT
REMOVE UPPER SIDE ENGINE LEFT MOUNTING,
NUT AND BOLT
Torque: 80 N·m (816 kgf·cm, 59 ft·lbf)
REMOVE OIL COOLER HOSE
SUPPORT TRANSAXLE WITH A JACK
REMOVE TORQUE CONVERTER CLUTCH MOUNT-
ING BOLT
Torque: 41 N·m (418 kgf·cm, 30 ft·lbf)
REMOVE TRANSAXLE ASSEMBLY
Remove the 4 bolts.
Torque:
A bolt: 46 N·m (470 kgf·cm, 34 ft·lbf)
B bolt: 23 N·m (230 kgf·cm, 17 ft·lbf)
Separate the transaxle from engine, and lower the trans-
axle.
1866