Toyota Celica 2005 Repair Manual page 2386

BO−80
A/T
4 Clips
2005 CELICA (RM1131U)
BODY − INSTRUMENT PANEL
(c) Using a clip remover, disengage the airbag connector
clamp.
(d) Disconnect the connector, then remove the lower finish
panel.
12. DISCONNECT PASSENGER AIRBAG CONNECTOR
Disconnect the passenger airbag connector.
NOTICE:
When disconnecting the airbag connector, take care not to
damage the airbag wire harness.
H12621
13. REMOVE PASSENGER AIRBAG ASSEMBLY
Remove the bolt, 2 nuts, and passenger airbag assembly.
Torque:
Bolt: 20 N·m (204 kgf·cm, 15 ft·lbf)
H12691
14. REMOVE UPPER CONSOLE PANEL
(a) M/T:
Remove the shift lever knob.
(b) Using a screwdriver, remove the upper console panel, the
disconnect the connector.
HINT:
Tape the screwdriver tip before use.
15. w/ Power window:
REMOVE POWER WINDOW CONTROL SWITCH
H12622
16. w/o Power window:
REMOVE CONSOLE BOX HOLE COVER
17. REMOVE CONSOLE BOX
(a) Remove the box bottom mat.
(b) Remove the 2 bolts, 4 screws and console box.
H12623
2385