Toyota Celica 2005 Repair Manual page 1966

SST
2005 CELICA (RM1131U)
SUSPENSION AND AXLE
REASSEMBLY
w/ ABS:
INSTALL NEW ABS SPEED SENSOR
(a) Clean the contacting surface of the axle hub and a new
ABS speed sensor.
NOTICE:
Do not allow any foreign matter sticking to the sensor rotor.
(b) Place the ABS speed sensor on the axle hub so that the
connector is set at the bottom under the on−vehicle condi-
tion.
(c) Using SST and a press, install a new ABS speed sensor
to the axle hub.
SST
NOTICE:
Do not tap the speed sensor with a hammer directly.
S
Check that there should be no foreign matter on the
S
speed sensor detection portion.
Press in the ABS speed sensor straightly and slowly.
S
F08658
1965
− REAR AXLE CARRIER
09214−76011
SA−59
SA1P9−05