7
8
17
16
7
16
17
16
2005 CELICA (RM1131U)
BODY ELECTRICAL
INSPECTION
1.
HI
LO
INT
MIST
MIST (w/ Mist wiper)
OFF
Washer ON
INT (w/ Intermittent wiper)
2
If continuity is not as specified, replace the switch.
11
I14298
2.
2
(a)
(b)
(c)
(d)
I01313
(e)
7
2
INT time control
switch position
FAST
I01314
SLOW
If operation is not as specified, replace the wiper and washer
switch.
−
WIPER AND WASHER SYSTEM
INSPECT FRONT WIPER AND WASHER SWITCH
CONTINUITY
Switch position
Tester connection
OFF
LO
HI
Washer ON
INSPECT FRONT WIPER INTERMITTENT OPERA-
TION
Turn the wiper switch to the INT position.
Turn the intermittent time control switch to FAST position.
Connect the battery positive (+) lead to terminal 16 and
the battery negative (−) lead to terminal 2.
Connect the voltmeter positive (+) lead to terminal 7 and
the voltmeter negative (−) lead to terminal 2, then check
that the meter needle indicates the battery voltage.
After connecting terminal 16 to terminal 17, connect to
terminal 2 to terminal 17, check the voltage rises from 0
volts to the battery voltage within the times as shown in
the table.
Approx. 0.6 − 2.6 secs.
Approx. 5.2 − 15.7 secs.
2213
Specified condition
7 − 16
Continuity
7 − 17
Continuity
7 − 16
Continuity
7 − 17
Continuity
8 − 17
Continuity
2 − 11
Continuity
Voltage
Battery voltage
0 Volt
Battery voltage
0 Volt
BE−39
BE2FF−02