Toyota Celica 2005 Repair Manual page 1866

C
A
A
Nut
No.1 Engine Hanger
2005 CELICA (RM1131U)
AUTOMATIC TRANSAXLE (U240E)
22.
(a)
B
(b)
B
A
A
F08665
23.
Remove the bolt and engine rear mounting insulator.
D05918
24.
No. 2 Engine
Hanger
(a)
(b)
A10434
(c)
CAUTION:
Do not attempt to hang the engine by hooking the chain to
any other part.
− AUTOMATIC TRANSAXLE UNIT
REMOVE SUSPENSION MEMBER
Remove the 9 bolts and 3 nuts.
Torque:
Bolt A: 157 N·m (1,601 kgf·cm, 116 ft·lbf)
Bolt B: 52 N·m (530 kgf·cm, 38 ft·lbf)
Bolt C: 39 N·m (398 kgf·cm, 29 ft·lbf)
Nut: 52 N·m (530 kgf·cm, 38 ft·lbf)
Remove the suspension member.
REMOVE ENGINE REAR MOUNTING INSULATOR
Torque: 87 N·m (890 kgf·cm, 64 ft·lbf)
ATTACH ENGINE SLING DEVICE TO ENGINE HANG-
ERS
Disconnect the 2 PCV hoses.
Install the No. 1 and No. 2 engine hangers in the correct
direction.
Parts No. :
No. 1 engine hanger: 12281−88600
No. 2 engine hanger: 12282−88600
Bolt: 91512−61020
Torque: 38 N·m (387 kgf·cm, 28 ft·lbf)
Attach the engine chain hoist to the engine hangers.
1865
AX−33