Toyota Celica 2005 Repair Manual page 2030

SST
2005 CELICA (RM1131U)
BRAKE − PARKING BRAKE
DISASSEMBLY
1. REMOVE REAR WHEEL
Torque: 103 N·m (1,050 kgf·cm, 76 ft·lbf)
2. REMOVE REAR DISC BRAKE ASSEMBLY
(a) Remove the 2 installation bolts and rear brake caliper.
Torque: 47 N·m (475 kgf·cm, 34 ft·lbf)
HINT:
Do not disconnect the flexible hose from the brake caliper.
(b) Suspend the disc brake securely. Ensure that the hose is
F09680
not stretched.
3. REMOVE DISC
Release the parking brake lever, and remove the disc.
HINT:
If the disc cannot be removed easily, turn the shoe adjuster until
the wheel turns freely.
R00885
4. REMOVE SHOE RETURN SPRINGS AND TENSION
SPRING
Using needle−nose pliers, remove the 2 shoe return springs
and tension spring.
5. REMOVE SHOE STRUT
F09688
6. REMOVE FRONT SHOE AND ADJUSTER
(a) Using SST, remove the shoe hold−down spring and pin
from the front shoe.
SST 09718−00010
(b) Remove the front shoe and adjuster.
F09689
2029
BR−43
BR0QS−04