Toyota Celica 2005 Repair Manual page 1762

MX−44
2005 CELICA (RM1131U)
MANUAL TRANSAXLE (C56)
9.
(a)
(b)
NOTICE:
Be sure to install the 4th driven gear and rear radial ball
SST
bearing in the correct direction, as shown in the illustra-
D07364
tion.
HINT:
Set SST to the bearing inner race securely.
− OUTPUT SHAFT
INSTALL OUTPUT GEAR SPACER, 4TH DRIVEN
GEAR AND REAR RADIAL BALL BEARING
Install the output gear spacer.
Using SST and a press, install the 4th driven gear and
rear radial ball bearing.
SST 09608−00071
1761