Texas Instruments SimpleLink CC2620 Technical Reference Manual page 97

www.ti.com
2.7.3.9 STIM8 Register (Offset = 20h) [reset = X]
STIM8 is shown in
Stimulus Port 8
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10
Bit Field
31-0 STIM8
SWCU117C – February 2015 – Revised September 2015
Submit Documentation Feedback
Figure 2-42 and described in
Figure 2-42. STIM8 Register
Table 2-67. STIM8 Register Field Descriptions
Type Reset
R/W X
Copyright © 2015, Texas Instruments Incorporated
Table 2-67.
STIM8
R/W-X
Description
A write to this location causes data to be written into the FIFO if
TER.STIMENA8 is set. Reading from the stimulus port returns the
FIFO status in bit [0]: 0 = full, 1 = not full. The polled FIFO interface
does not provide an atomic read-modify-write, so it's users
responsibility to ensure exclusive read-modify-write if this ITM port is
used concurrently by interrupts or other threads.
Cortex-M3 Processor Registers
9 8 7 6 5 4 3 2 1 0
97