Texas Instruments SimpleLink CC2620 Technical Reference Manual page 264

Interrupts and Events Registers
Table 4-12. EVTOMCUSEL Register Field Descriptions (continued)
Bit Field
7-6 RESERVED
264
Interrupts and Events
Type Reset Description
2Bh = JTAG generated event
2Ch = AUX Software triggered event 0. Triggered by
AUX_EVCTL:SWEVSET.SWEV0
2Dh = AUX Software triggered event 1. Triggered by
AUX_EVCTL:SWEVSET.SWEV1
2Eh = AUX Software triggered event 2. Triggered by
AUX_EVCTL:SWEVSET.SWEV2
2Fh = Comparator A triggered
30h = Comparator B triggered
31h = ADC conversion completed
32h = TDC completed or timed out
33h = AUX Timer 0 Event
34h = AUX Timer 1 Event
35h = BATMON temperature update event
36h = BATMON voltage update event
37h = Comparator B triggered. Asynchronous signal directly from the
AUX Comparator B as opposed to AUX_COMPB, which is
synchronized in AUX
38h = Comparator B not triggered. Asynchronous signal directly from
AUX Comparator B (inverted) as opposed to AUX_COMPB, which is
synchronized in AUX
3Fh = No event, always low
R 0h
Software must not rely on the value of a reserved. Writing any other
value than the reset value may result in undefined behavior.
Copyright © 2015, Texas Instruments Incorporated
SWCU117C – February 2015 – Revised September 2015
Submit Documentation Feedback
www.ti.com