Texas Instruments SimpleLink CC2620 Technical Reference Manual page 841

www.ti.com
Table 10-22. KEYWRITEAREA Register Field Descriptions (continued)
Bit Field
2 RAM_AREA2
1 RAM_AREA1
0 RAM_AREA0
SWCU117C – February 2015 – Revised September 2015
Submit Documentation Feedback
Type Reset Description
R/W 0h Represents an area of 128 bits.
Select the key store RAM area or areas where the key or keys need
to be written.
Writing to multiple RAM locations is only possible when the selected
RAM areas are sequential.
0h = This RAM area is not selected to be written.
1h = This RAM area is selected to be written.
R/W 0h Represents an area of 128 bits.
Select the key store RAM area or areas where the key or keys need
to be written.
Writing to multiple RAM locations is only possible when the selected
RAM areas are sequential.
0h = This RAM area is not selected to be written.
1h = This RAM area is selected to be written.
R/W 0h Represents an area of 128 bits.
Select the key store RAM area or areas where the key or keys need
to be written.
Writing to multiple RAM locations is only possible when the selected
RAM areas are sequential.
0h = This RAM area is not selected to be written .
1h = This RAM area is selected to be written.
Copyright © 2015, Texas Instruments Incorporated
Cryptography Registers
841