Texas Instruments SimpleLink CC2620 Technical Reference Manual page 698

Customer Configuration (CCFG)
9.1.1.8 FREQ_OFFSET Register (Offset = FC4h) [reset = FFFFFFFFh]
FREQ_OFFSET is shown in
Frequency Offset
31 30 29 28
15 14 13 12
HF_COMP_P1
R/W-FFh
Bit Field
31-16 HF_COMP_P0
15-8 HF_COMP_P1
7-0 HF_COMP_P2
698
Device Configuration
Figure 9-8 and described in
Figure 9-8. FREQ_OFFSET Register
27 26 25 24
HF_COMP_P0
R/W-FFFFh
11 10 9 8
Table 9-9. FREQ_OFFSET Register Field Descriptions
Type Reset
R/W FFFFh
R/W FFh
R/W FFh
Copyright © 2015, Texas Instruments Incorporated
Table 9-9.
23 22 21 20
7 6 5 4
HF_COMP_P2
R/W-FFh
Description
Reserved for future use. Software must not rely on the value of a
reserved. Writing any other value than the reset/default value may
result in undefined behavior.
Reserved for future use. Software must not rely on the value of a
reserved. Writing any other value than the reset/default value may
result in undefined behavior.
Reserved for future use. Software must not rely on the value of a
reserved. Writing any other value than the reset/default value may
result in undefined behavior.
SWCU117C – February 2015 – Revised September 2015
www.ti.com
19 18 17 16
3 2 1 0
Submit Documentation Feedback