Texas Instruments SimpleLink CC2620 Technical Reference Manual page 705

www.ti.com
9.1.1.15 CCFG_TI_OPTIONS Register (Offset = FE0h) [reset = FFFFFFC5h]
CCFG_TI_OPTIONS is shown in
TI Options
31 30 29 28
15 14 13 12
RESERVED
R/W-FFFFFFh
Bit Field
31-8 RESERVED
7-0 TI_FA_ENABLE
SWCU117C – February 2015 – Revised September 2015
Submit Documentation Feedback
Figure 9-15 and described in
Figure 9-15. CCFG_TI_OPTIONS Register
27 26 25 24
RESERVED
R/W-FFFFFFh
11 10 9 8
Table 9-16. CCFG_TI_OPTIONS Register Field Descriptions
Type Reset
R/W FFFFFFh
R/W C5h
Copyright © 2015, Texas Instruments Incorporated
Table 9-16.
23 22 21 20
7 6 5 4
TI_FA_ENABLE
R/W-C5h
Description
Software must not rely on the value of a reserved. Writing any other
value than the reset value may result in undefined behavior.
TI Failure Analysis.
0xC5: Enable the functionality of unlocking the TI FA (TI Failure
Analysis) option with the unlock code.
All other values: Disable the functionality of unlocking the TI FA
option with the unlock code.
Customer Configuration (CCFG)
19 18 17 16
3 2 1
Device Configuration
0
705