Texas Instruments SimpleLink CC2620 Technical Reference Manual page 692

Customer Configuration (CCFG)
9.1.1.3 SIZE_AND_DIS_FLAGS Register (Offset = FB0h) [reset = FFFFFFFFh]
SIZE_AND_DIS_FLAGS is shown in
CCFG Size and Disable Flags
31 30
23 22
15 14
7 6
Bit Field
31-16 SIZE_OF_CCFG
15-2 DISABLE_FLAGS
1 DIS_ALT_DCDC_SETTIN R/W
G
0 DIS_XOSC_OVR
692
Device Configuration
Figure 9-3
Figure 9-3. SIZE_AND_DIS_FLAGS Register
29 28
SIZE_OF_CCFG
R/W-FFFFh
21 20
SIZE_OF_CCFG
R/W-FFFFh
13 12
DISABLE_FLAGS
R/W-3FFFh
5 4
DISABLE_FLAGS
R/W-3FFFh
Table 9-4. SIZE_AND_DIS_FLAGS Register Field Descriptions
Type Reset
R/W FFFFh
R/W 3FFFh
1h
R/W 1h
Copyright © 2015, Texas Instruments Incorporated
and described in Table 9-4.
27 26
19 18
11 10
3 2
Description
Total size of CCFG in bytes.
Reserved for future use. Software must not rely on the value of a
reserved. Writing any other value than the reset/default value may
result in undefined behavior.
Disable alternate DC–DC settings.
0: Enable alternate DC–DC settings.
1: Disable alternate DC–DC settings.
See:
MODE_CONF_1.ALT_DCDC_VMIN
MODE_CONF_1.ALT_DCDC_DITHER_EN
MODE_CONF_1.ALT_DCDC_IPEAK
NOTE: The DriverLib function
SysCtrl_DCDC_VoltageConditionalControl() must be called regularly
to apply this field (handled automatically if using TI RTOS).
Disable XOSC override functionality.
0: Enable XOSC override functionality.
1: Disable XOSC override functionality.
See:
MODE_CONF_1.DELTA_IBIAS_INIT
MODE_CONF_1.DELTA_IBIAS_OFFSET
MODE_CONF_1.XOSC_MAX_START
SWCU117C – February 2015 – Revised September 2015
www.ti.com
25 24
17 16
9 8
1 0
DIS_ALT_DCD DIS_XOSC_OV
C_SETTING R
R/W-1h R/W-1h
Submit Documentation Feedback