Texas Instruments SimpleLink CC2620 Technical Reference Manual page 786

Factory Configuration (FCFG)
9.2.1.65 ANABYPASS_VALUE2 Register (Offset = 37Ch) [reset = FFFFC3FFh]
ANABYPASS_VALUE2 is shown in
Analog Bypass Value for OSC
31 30 29 28
15 14 13 12
RESERVED
R-3FFFFh
Bit Field
31-14 RESERVED
13-0 XOSC_HF_IBIASTHERM
786
Device Configuration
Figure 9-87
Figure 9-87. ANABYPASS_VALUE2 Register
27 26 25
11 10 9
Table 9-89. ANABYPASS_VALUE2 Register Field Descriptions
Type Reset
R 3FFFFh
R 3FFh
Copyright © 2015, Texas Instruments Incorporated
and described in Table
24 23 22 21
RESERVED
R-3FFFFh
8 7 6 5
XOSC_HF_IBIASTHERM
R-3FFh
Description
Software must not rely on the value of a reserved. Writing any other
value than the reset value may result in undefined behavior.
Value of xosc_hf_ibiastherm when oscdig is bypassed.
SWCU117C – February 2015 – Revised September 2015
www.ti.com
9-89.
20 19 18 17
4 3 2 1
Submit Documentation Feedback
16
0