Texas Instruments SimpleLink CC2620 Technical Reference Manual page 548

VIMS Registers
7.8.1.2 CFG Register (Offset = 24h) [reset = 0h]
CFG is shown in Figure 7-11
Internal. Only to be used through TI provided API.
31 30
23 22
15 14
7 6
STANDBY_PW_SEL
R/W-0h
Bit Field
31-9 RESERVED
8 STANDBY_MODE_SEL
7-6 STANDBY_PW_SEL
5 DIS_EFUSECLK
4 DIS_READACCESS
3 ENABLE_SWINTF
2 RESERVED
1 DIS_STANDBY
0 DIS_IDLE
548
Versatile Instruction Memory System (VIMS)
and described in Table
Figure 7-11. CFG Register
29 28
RESERVED
R/W-0h
21 20
RESERVED
R/W-0h
13 12
RESERVED
R/W-0h
5 4
DIS_EFUSECL DIS_READACC ENABLE_SWIN
K ESS
R/W-0h R/W-0h
Table 7-5. CFG Register Field Descriptions
Type Reset
R/W 0h
R/W 0h
R/W 0h
R/W 0h
R/W 0h
R/W 0h
R/W 0h
R/W 0h
R/W 0h
Copyright © 2015, Texas Instruments Incorporated
7-5.
27 26
19 18
11 10
3 2
RESERVED
TF
R/W-0h R/W-0h
Description
Internal. Only to be used through TI provided API.
Internal. Only to be used through TI provided API.
Internal. Only to be used through TI provided API.
Internal. Only to be used through TI provided API.
Internal. Only to be used through TI provided API.
Internal. Only to be used through TI provided API.
Software must not rely on the value of a reserved. Writing any other
value than the reset value may result in undefined behavior.
Internal. Only to be used through TI provided API.
Internal. Only to be used through TI provided API.
SWCU117C – February 2015 – Revised September 2015
www.ti.com
25 24
17 16
9 8
STANDBY_MO
DE_SEL
R/W-0h
1 0
DIS_STANDBY DIS_IDLE
R/W-0h R/W-0h
Submit Documentation Feedback