Texas Instruments SimpleLink CC2620 Technical Reference Manual page 748

Factory Configuration (FCFG)
9.2.1.29 FLASH_C_E_P_R Register (Offset = 174h) [reset = A0A2000h]
FLASH_C_E_P_R is shown in
Flash Compaction, Execute, Program and Read
31 30 29 28
15 14 13 12
A_EXEZ_SETUP
R-2h
Bit Field
31-24 RVSU
23-16 PV_ACCESS
15-12 A_EXEZ_SETUP
11-0 CVSU
748
Device Configuration
Figure 9-51 and described in
Figure 9-51. FLASH_C_E_P_R Register
27 26 25
RVSU
R-Ah
11 10 9
Table 9-53. FLASH_C_E_P_R Register Field Descriptions
Type Reset
R Ah
R Ah
R 2h
R 0h
Copyright © 2015, Texas Instruments Incorporated
Table 9-53.
24 23 22 21
8 7 6 5
CVSU
R-0h
Description
Repeat verify setup time in cycles. Used for repeated verifies during
program and erase. Value will be written to
FLASH:FSM_EX_VAL.REP_VSU by the flash device driver when an
erase/program operation is initiated.
Program verify EXECUTEZ->data valid time in half-microseconds.
Value will be converted to number of FCLK cycles by by flash device
driver and the converted value is written to
FLASH:FSM_EX_VAL.EXE_VALD when an erase/program
operation is initiated..
Address->EXECUTEZ setup time in cycles. Value will be written to
FLASH:FSM_CMP_VSU.ADD_EXZ by the flash device driver when
an erase/program operation is initiated..
Compaction verify setup time in cycles.
SWCU117C – February 2015 – Revised September 2015
www.ti.com
20 19 18 17
PV_ACCESS
R-Ah
4 3 2 1
Submit Documentation Feedback
16
0