Texas Instruments SimpleLink CC2620 Technical Reference Manual page 708

Customer Configuration (CCFG)
9.1.1.18 IMAGE_VALID_CONF Register (Offset = FECh) [reset = FFFFFFFFh]
IMAGE_VALID_CONF is shown in
Image Valid
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10
Bit Field
31-0 IMAGE_VALID
708
Device Configuration
Figure 9-18
Figure 9-18. IMAGE_VALID_CONF Register
IMAGE_VALID
R/W-FFFFFFFFh
Table 9-19. IMAGE_VALID_CONF Register Field Descriptions
Type Reset
R/W FFFFFFFFh This field must have a value of 0x00000000 in order for enabling the
Copyright © 2015, Texas Instruments Incorporated
and described in Table 9-19.
Description
boot sequence to transfer control to a flash image.
A nonzero value forces the boot sequence to call the boot loader.
SWCU117C – February 2015 – Revised September 2015
www.ti.com
9 8 7 6 5 4 3 2
Submit Documentation Feedback
1 0