Texas Instruments SimpleLink CC2620 Technical Reference Manual page 332

Interrupts and Events Registers
Table 4-63. GPT2ACAPTSEL Register Field Descriptions (continued)
Bit Field
332
Interrupts and Events
Type Reset Description
70h = AUX ADC done, corresponds to
AUX_EVCTL:EVTOMCUFLAGS.ADC_DONE
71h = AUX ADC FIFO watermark event, corresponds to
AUX_EVCTL:EVTOMCUFLAGS.ADC_FIFO_ALMOST_FULL
72h = Loopback of OBSMUX0 through AUX, corresponds to
AUX_EVCTL:EVTOMCUFLAGS.OBSMUX0
73h = AUX ADC interrupt event, corresponds to
AUX_EVCTL:EVTOMCUFLAGS.ADC_IRQ. Status flags are found
here AUX_EVCTL:EVTOMCUFLAGS
77h = RTC periodic event controlled by
AON_RTC:CTL.RTC_UPD_EN
79h = Always asserted
Copyright © 2015, Texas Instruments Incorporated
SWCU117C – February 2015 – Revised September 2015
Submit Documentation Feedback
www.ti.com