Texas Instruments SimpleLink CC2620 Technical Reference Manual page 774

Factory Configuration (FCFG)
9.2.1.53 IOCONF Register (Offset = 344h) [reset = X]
IOCONF is shown in
IO Configuration
31 30 29 28
15 14 13 12
Bit Field
31-7 RESERVED
6-0 GPIO_CNT
774
Device Configuration
Figure 9-75 and described in
Figure 9-75. IOCONF Register
27 26 25
R-FFFFFF00h
11 10 9
RESERVED
R-FFFFFF00h
Table 9-77. IOCONF Register Field Descriptions
Type Reset
R FFFFFF00h Software must not rely on the value of a reserved. Writing any other
R X
Copyright © 2015, Texas Instruments Incorporated
Table 9-77.
24 23 22 21
RESERVED
8 7 6 5
Description
value than the reset value may result in undefined behavior.
This value is written to IOC:CFG.GPIO_CNT by boot FW while in
safezone.
Default value differs depending on partnumber.
SWCU117C – February 2015 – Revised September 2015
www.ti.com
20 19 18 17
4 3 2 1
GPIO_CNT
R-X
Submit Documentation Feedback
16
0