This chapter describes the device configuration areas. The factory configuration (FCFG) and customer
configuration (CCFG) areas are located in flash. The FCFG is set by Texas Instruments during device
production and contains device-specific trim values and configuration. The CCFG must be set by the
application and contains configuration parameters for the ROM bootcode, device hardware, and device
firmware.
...........................................................................................................................
Topic
9.1
Customer Configuration (CCFG)
9.2
Factory Configuration (FCFG)
SWCU117C – February 2015 – Revised September 2015
Submit Documentation Feedback
SWCU117C – February 2015 – Revised September 2015
........................................................................
...........................................................................
Copyright © 2015, Texas Instruments Incorporated
Device Configuration
Device Configuration
Chapter 9
Page
689
718
687