Texas Instruments SimpleLink CC2620 Technical Reference Manual page 65

www.ti.com
2.7.1.12 COMP1 Register (Offset = 30h) [reset = X]
COMP1 is shown in
Comparator 1
This register is used to write the reference value for comparator 1.
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10
Bit Field
31-0 COMP
SWCU117C – February 2015 – Revised September 2015
Submit Documentation Feedback
Figure 2-15 and described in
Figure 2-15. COMP1 Register
Table 2-38. COMP1 Register Field Descriptions
Type Reset
R/W X
Copyright © 2015, Texas Instruments Incorporated
Table 2-38.
COMP
R/W-X
Description
Reference value to compare against PC or the data address as
given by FUNCTION1.
Comparator 1 can also compare data values. So this register can
contain reference values for data matching.
Cortex-M3 Processor Registers
9 8 7 6 5 4 3 2 1 0
65