Texas Instruments SimpleLink CC2620 Technical Reference Manual page 753

www.ti.com
9.2.1.34 FLASH_PROG_EP Register (Offset = 188h) [reset = FA00010h]
FLASH_PROG_EP is shown in
Flash Program and Erase Pulse
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10
MAX_EP
Bit Field
31-16 MAX_EP
15-0 PROGRAM_PW
SWCU117C – February 2015 – Revised September 2015
Submit Documentation Feedback
Figure 9-56
Figure 9-56. FLASH_PROG_EP Register
R-FA0h
Table 9-58. FLASH_PROG_EP Register Field Descriptions
Type Reset
R FA0h
R 10h
Copyright © 2015, Texas Instruments Incorporated
and described in Table 9-58.
Description
Max erase pulse limit per erase operation. Value will be written to
FLASH:FSM_ERA_PUL.MAX_ERA_PUL when an erase/program
operation is initiated.
Program pulse width in half-microseconds. Value will be converted to
number of FCLK cycles by the flash device driver and the converted
value is written to FLASH:FSM_PRG_PW.PROG_PUL_WIDTH
when a erase/program operation is initiated.
Factory Configuration (FCFG)
9 8 7 6 5 4 3
PROGRAM_PW
R-10h
Device Configuration
2 1 0
753