Texas Instruments SimpleLink CC2620 Technical Reference Manual page 535

www.ti.com
7.1.1.1 GPRAM Mode
In GPRAM mode, the RAM block functions as a general-purpose RAM. The Flash block has no cache
support, and all accesses to the flash are routed directly to the Flash block.
icode/dcode
sysbus
7.1.1.2 Off Mode
In off mode, the RAM block is disabled and cannot be accessed by the CPU or by the system bus. The
Flash block has no cache support, and all accesses to the flash are routed directly to the Flash block.
icode/dcode
sysbus
SWCU117C – February 2015 – Revised September 2015
Submit Documentation Feedback
Figure 7-3. VIMS Module in GPRAM Mode
GPRAM
address space
GPRAM
SYSCODE and
USERCODE
address space
FLASH
BROM
address space
Figure 7-4. VIMS Module in Off Mode
GPRAM
SYSCODE and
USERCODE
address space
FLASH
BROM
address space
Copyright © 2015, Texas Instruments Incorporated
icode/dcode
sysbus
ROM
icode/dcode
sysbus
ROM
Versatile Instruction Memory System (VIMS)
VIMS Configurations
535