Texas Instruments SimpleLink CC2620 Technical Reference Manual page 480

PRCM Registers
Table 6-49. CLKLOADCTL Register Field Descriptions (continued)
Bit Field
0 LOAD
480
Power, Reset, and Clock Management
Type Reset Description
W 0h 0: No action
1: Load settings to CLKCTRL. Bit is HW cleared.
Multiple changes to settings may be done before LOAD is written
once so all changes takes place at the same time. LOAD can also
be done after single setting updates.
Registers that needs to be followed by LOAD before settings being
applied are:
- RFCCLKG
- VIMSCLKG
- SECDMACLKGR
- SECDMACLKGS
- SECDMACLKGDS
- GPIOCLKGR
- GPIOCLKGS
- GPIOCLKGDS
- GPTCLKGR
- GPTCLKGS
- GPTCLKGDS
- GPTCLKDIV
- I2CCLKGR
- I2CCLKGS
- I2CCLKGDS
- SSICLKGR
- SSICLKGS
- SSICLKGDS
- UARTCLKGR
- UARTCLKGS
- UARTCLKGDS
- I2SCLKGR
- I2SCLKGS
- I2SCLKGDS
- I2SBCLKSEL
- I2SCLKCTL
- I2SMCLKDIV
- I2SBCLKDIV
- I2SWCLKDIV
Copyright © 2015, Texas Instruments Incorporated
SWCU117C – February 2015 – Revised September 2015
Submit Documentation Feedback
www.ti.com