Auto-Cost - Dell C9000 Series Reference Manual

Version
8.3.7.0
7.8.1.0
7.6.1.0
7.5.1.0
6.1.1.1
Usage Information To configure all routers and access servers within a stub, use this command.
Related
router ospf
Commands

auto-cost

Specify how the OSPF interface cost is calculated based on the reference bandwidth method.
C9000 Series
Syntax
auto-cost [reference-bandwidth ref-bw]
To return to the default bandwidth or to assign cost based on the interface type, use
the no auto-cost [reference-bandwidth] command.
Parameters
ref-bw
Defaults 100 megabits per second.
Command Modes ROUTER OSPFv3
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
Description
Introduced on the S4810.
Added support for the Multi-Process OSPF.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
— enters ROUTER OSPF mode to configure an OSPF instance.
(OPTIONAL) Specify a reference bandwidth in megabits per
second. The range is from 1 to 4294967. The default is 100
megabits per second.
Description
Introduced on the C9010.
Open Shortest Path First (OSPFv2 and OSPFv3) 1486