Area Range - Dell S4810 Reference Manual

Hide thumbs Also See for S4810:

Table of Contents

Not configured.

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version 9.0.2.0

Version 8.3.11.1

Version 8.3.7.0

Version 7.8.1.0

Version 7.6.1.0

Version 7.5.1.0

area range

Summarize routes matching an address/mask at an area border router (ABR).

area area-id range ip-address mask [not-advertise]

To disable route summarization, use the no area area-id range ip-address

mask command.

not-advertise

(OPTIONAL) Specify that no summary LSAs should be sent

into the NSSA.

Introduced on the S6000.

Introduced on the S4820T.

Introduced on the Z9000.

Introduced on the S4810.

Added support for the Multi-Process OSPF.

Introduced on the S-Series.

Introduced on the C-Series.

Introduced on the E-Series.

Specify the OSPF area in dotted decimal format (A.B.C.D.) or

enter a number from zero (0) to 65535.

Specify an IP address in dotted decimal format.

Specify a mask for the destination prefix. Enter the full mask

(for example, 255.255.255.0).

(OPTIONAL) Enter the keywords not-advertise to set the

status to DoNotAdvertise (that is, the Type 3 summary-LSA is

suppressed and the component networks remain hidden

from other areas.)

Open Shortest Path First (OSPFv2 and OSPFv3)