Area Range - Dell C9000 Series Reference Manual

Version
7.6.1.0
7.5.1.0
6.1.1.1

area range

Summarize routes matching an address/mask at an area border router (ABR).
C9000 Series
Syntax
area area-id range ip-address mask [not-advertise]
To disable route summarization, use the no area area-id range ip-address
mask command.
Parameters
area-id
ip-address
mask
not-advertise
Defaults Not configured.
Command Modes ROUTER OSPF
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
Description
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Specify the OSPF area in dotted decimal format (A.B.C.D.) or
enter a number from zero (0) to 65535.
Specify an IP address in dotted decimal format.
Specify a mask for the destination prefix. Enter the full mask (for
example, 255.255.255.0).
(OPTIONAL) Enter the keywords not-advertise to set the
status to DoNotAdvertise (that is, the Type 3 summary-LSA is
suppressed and the component networks remain hidden from
other areas.)
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Open Shortest Path First (OSPFv2 and OSPFv3) 1484