Table of Contents
Advertisement
2.8
Configure Spanning tree on edge ports
sw0(config)#protocol spanning-tree rstp
sw0(config-rstp)#exit
sw0(config)#interface TenGigabitEthernet 1/0/1-48
sw0(conf-if-te-1/0/1-48)# spanning-tree edgeport
sw0(conf-if-te-1/0/1-48)# exit
2.9
Disable LLDP iSCSI priority on Switch Ports
sw0(config)#interface TenGigabitEthernet 1/0/1-48
sw0(conf-if-te-1/0/1-48)# no lldp disable
sw0(conf-if-te-1/0/1-48)# no cee
sw0(conf-if-te-1/0/1-48)# no lldp iscsi-priority
sw0(conf-if-te-1/0/1-48)# exit
sw0(config)#exit
2.10
Save configuration
switch#copy running-config startup-config
2.11
Configure additional switch
Repeat the commands from sections 2.1 through 2.10 to configure the second switch.
8
SCG2013 | Brocade VDX 6740 Switch Configuration Guide for Dell SC Series SANs
Advertisement
Table of Contents
