Monitor Atm Vc - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual

JunosE 11.2.x Command Reference Guide A to M

monitor atm vc

Syntax
Release Information
Description
Options
Mode
1320
monitor atm vc atm interfaceSpecifier vcd [ atm interfaceSpecifier vcd ]*
[ load-interval seconds ] [ display-time-of-day ]
Command introduced before JunosE Release 7.1.0.
Displays bit rate and packet rate statistics over a specified time interval for one or more
ATM virtual circuits (VCs). There is no no version.
interfaceSpecifier—ATM interface specifier; see Interface Types and Specifiers on
page 5
vcd—Virtual circuit descriptor that is an identifier for the VC in other commands; number
in the range 1–2147483647
seconds—Number of seconds in the range 5–30 that specifies the time interval at
which the router calculates bit rates and packet rates for the specified VC; default
value is 5 seconds
display-time-of-day—Sets time at which the router calculates the bit rate and packet
rate statistics for the current interval
*—Indicates that one or more parameters can be repeated multiple times in a list in
the command line
Privileged Exec, User Exec
Copyright © 2010, Juniper Networks, Inc.