Port-Security Enable - 3Com S7906E Command Reference Manual

View
Ethernet port view
Default Level
2: System level
Parameters
None
Description
Use the port-security authorization ignore command to configure a port to ignore the authorization
information from the RADIUS server.
Use the undo port-security port-mode ignore command to restore the default.
By default, a port uses the authorization information from the RADIUS server.
After a user passes RADIUS authentication, the RADIUS server performs authorization based on the
authorization attributes configured for the user's account. For example, it may assign a VLAN.
Related commands: display port-security.
Examples
# Configure port GigabitEthernet 2/0/1 to ignore the authorization information from the RADIUS server.
<Sysname> system-view
[Sysname] interface gigabitethernet 2/0/1
[Sysname-GigabitEthernet2/0/1] port-security authorization ignore

port-security enable

Syntax
port-security enable
undo port-security enable
View
System view
Default Level
2: System level
Parameters
None
Description
Use the port-security enable command to enable port security.
Use the undo port-security enable command to disable port security.
By default, port security is disabled.
Note that:
1) Port security cannot be enabled when 802.1X or MAC authentication is enabled globally.
1-6