Port-Security Oui; Port-Security Port-Mode - 3Com S7906E Command Reference Manual

Examples
# Set the NTK mode of port GigabitEthernet 2/0/1 to ntkonly, allowing the port to forward received
packets to only devices passing authentication.
<Sysname> system-view
[Sysname] interface gigabitethernet 2/0/1
[Sysname-GigabitEthernet2/0/1] port-security ntk-mode ntkonly

port-security oui

Syntax
port-security oui oui-value index index-value
undo port-security oui index index-value
View
System view
Default Level
2: System level
Parameters
oui-value: Organizationally unique identifier (OUI) string, a 48-bit MAC address in the H-H-H format.
The system automatically uses only the 24 high-order bits as the OUI value.
index-value: OUI index, in the range 1 to 16.
Description
Use the port-security oui command to configure an OUI value for user authentication. This value is
used when the port security mode is UserLoginWithOUI.
Use the undo port-security oui command to delete an OUI value with the specified OUI index.
By default, no OUI value is configured.
Note that an OUI value configured by using the port-security oui command takes effect only when the
security mode is userLoginWithOUI.
Related commands: display port-security.
Examples
# Configure an OUI value of 000d2a, setting the index to 4.
<Sysname> system-view
[Sysname] port-security oui 000d-2a10-0033 index 4

port-security port-mode

Syntax
port-security port-mode { autolearn | mac-authentication | mac-else-userlogin-secure |
mac-else-userlogin-secure-ext | secure | userlogin | userlogin-secure | userlogin-secure-ext |
userlogin-secure-or-mac | userlogin-secure-or-mac-ext | userlogin-withoui }
undo port-security port-mode
1-11