Renesas M16C/50 Series User Manual page 622

M16C/5L Group, M16C/56 Group
23.1.19 CAN0 Error Interrupt Enable Register (C0EIER)
CAN0 Error Interrupt Enable Register
b7 b6 b5 b4 b3 b2 b1
Note:
1. Write to the C0EIER register in CAN reset mode.
Figure 23.24 C0EIER Register
The C0EIER register is used to set the error interrupt enabled/disabled individually for each error
interrupt source in the C0EIFR register.
R01UH0127EJ0110 Rev.1.10
Sep 01, 2011
b0
Symbol
C0EIER
Bit Symbol
Bus Error Interrupt
BEIE
Enable Bit
Error Warning Interrupt
EWIE
Enable Bit
Error Passive Interrupt
EPIE
Enable Bit
Bus-Off Entry Interrupt
BOEIE
Enable Bit
Bus-Off Recovery Interrupt
BORIE
Enable Bit
Receive Overrun Interrupt
ORIE
Enable Bit
Overload Frame
OLIE Transmit Interrupt
Enable Bit
Bus Lock Interrupt
BLIE
Enable Bit
(1)
Address
D7CCh
Bit Name
0: Bus error interrupt disabled
1: Bus error interrupt enabled
0: Error warning interrupt disabled
1: Error warning interrupt enabled
0: Error passive interrupt disabled
1: Error passive interrupt enabled
0: Bus-off entry interrupt disabled
1: Bus-off entry interrupt enabled
0: Bus-off recovery interrupt disabled
1: Bus-off recovery interrupt enabled
0: Receive overrun interrupt disabled
1: Receive overrun interrupt enabled
0: Overload frame transmit
interrupt disabled
1: Overload frame transmit
interrupt enabled
0: Bus lock interrupt disabled
1: Bus lock interrupt enabled
23. CAN Module
Reset Value
00h
Function RW
RW
RW
RW
RW
RW
RW
RW
RW
Page 585 of 803