Advertisement
M16C/5L Group, M16C/56 Group
Table 18.15
Registers and Settings in Inverted Waveform Output Mode
Register
G1POj
G1FS
G1FE
MOD1 and MOD0 Set to 10b.
G1POCRj
G1OER
G1IOR0
IOj1 and IOj0
G1IOR1
G1BCR1
UD1 and UD0
j = 0 to 7, however, when the RST1 bit in the G1BCR1 register is 1 (the base timer is reset when the base
timer and G1PO0 register values match), then j = 1 to 7.
Note:
1.
This table does not describe a procedure.
R01UH0127EJ0110 Rev.1.10
Sep 01, 2011
Bit
—
Set the timing for the waveform to be inverted.
FSCj
Set to 0 (waveform generation function selected).
IFEj
Set to 1 (channel j function enabled).
IVL
Select a default value of an output level.
RLD
Select the reload timing for the G1POj register value.
INV
Select whether an output level is inverted.
EOCj
Set to 1 when the OUTC1_j output is disabled.
Select an output level when compare results match.
Set to 00b or 01b.
(1)
Function
18. Timer S
Page 386 of 803
Advertisement
