Renesas M16C/50 Series User Manual page 178

M16C/5L Group, M16C/56 Group
10.2.2 Program 2 Area Control Register (PRG2C)
Program 2 Area Control Register
b7 b6 b5 b4 b3 b2 b1
0
Set the PRC6 bit in the PRCR register to 1 (write enabled) before rewriting this register.
PRG2C0 (Program ROM 2 disable bit) (b0)
This bit is used to select the function of program ROM 2 (addresses 10000h to 13FFFh).
Program ROM 2 includes the on-chip debugger monitor area and user boot code area. Refer to 26.7.1
"User Boot Function" for details.
R01UH0127EJ0110 Rev.1.10
Sep 01, 2011
b0
Symbol
PRG2C
Bit Symbol Bit Name
PRG2C0 Program ROM 2 disable bit
(b1) Reserved bit
—
No register bits. If necessary, set to 0. The read value is undefined.
(b7-b2)
Address
0010h
0 : Enable program ROM 2
1 : Disable program ROM 2
Set to 0.
10. Processor Mode
Reset Value
XXXX XX00b
Function
(reserved area)
Page 141 of 803
RW
RW
RW
—