Renesas M16C/50 Series User Manual page 392

M16C/5L Group, M16C/56 Group
GOC (Gate function release select bit) (b5)
The GOC bit is only available in registers G1TMCR6 and G1TMCR7. Set bits 7 to 4 in registers
G1MCR0 to G1TMCR5 to 0000b.
The GOC bit is enabled only when the GT bit is 1.
Refer to 18.2.2 "Waveform Generation Register j (G1POj) (j = 0 to 7)" for details on the G1POk register
(k = 4 when j = 6; k = 5 when j = 7).
The value written to this bit is reflected to the internal circuit when the clock is synchronized with the
base timer count source (fBT1).
GSC (Gate function release bit) (b6)
The GSC bit is only available in registers G1TMCR6 and G1TMCR7. Set bits 7 to 4 in registers
G1MCR0 to G1TMCR5 to 0000b.
The GSC bit is enabled only when the GT bit is 1.
Set this bit to 1 when the gate function is released; otherwise set it to 0.
The value written to this bit is reflected to the internal circuit when the clock is synchronized with the
base timer count source (fBT1).
PR (Prescaler select bit) (b7)
Rewrite the PR bit when bits BCK1 and BCK0 in the G1BCR0 register are 00b (clock stops).
The PR bit is only available in registers G1TMCR6 and G1TMCR7. Set bits 7 to 4 in registers G1MCR0
to G1TMCR5 to 0000b.
R01UH0127EJ0110 Rev.1.10
Sep 01, 2011
18. Timer S
Page 355 of 803