Renesas M16C/50 Series User Manual page 482

M16C/5L Group, M16C/56 Group
ACKD (ACK data bit) (b4)
ACKC (ACK data output enable bit) (b5)
SWC9 (SCL wait auto insert bit 3) (b7)
This bit is used in slave mode of I
2
to 1 (I C mode). Do not set this bit to 1 when the IICM bit is 0.
SCLHI (SCL output stop bit) (b6)
This bit is used in master mode of I
2
register to 1 (I C mode). Do not set this bit to 1 when the IICM bit is 0.
R01UH0127EJ0110 Rev.1.10
Sep 01, 2011
2
C mode. To set this bit to 1, preset the IICM bit in the U2SMR register
2
C mode. To set this bit to 1, preset the IICM bit in the U2SMR
21. Serial Interface UARTi (i = 0 to 4)
Page 445 of 803