asieps_tobira_IM_US.book 252 ページ 2012年1月17日 火曜日 午後3時48分
Diagnostic Trouble Code (DTC) Detecting Criteria
GENERAL DESCRIPTION
EA:DTC P2109 THROTTLE/PEDAL POSITION SENSOR "A" MINIMUM STOP
PERFORMANCE
1. OUTLINE OF DIAGNOSIS
Judge as NG when full close point learning cannot conducted or abnormal value is detected.
2. COMPONENT DESCRIPTION
(1)
(1)
Engine control module (ECM)
(2)
Drive circuit
3. ENABLE CONDITION
Secondary Parameters
Ignition switch
Ignition switch (only after clear memory)
4. GENERAL DRIVING CYCLE
Perform the diagnosis at full closed point learning.
5. DIAGNOSTIC METHOD
Judge as OK and clear the NG when the malfunction criteria below are met.
Judgment Value
Malfunction Criteria
Throttle sensor opening angle at full
close point learning
Throttle opening angle when the ignition
switch is ON – Throttle minimum stop
position
Time Needed for Diagnosis: None
Malfunction Indicator Light Illumination: Illuminates as soon as a malfunction occurs.
6. DTC CLEAR CONDITION
• When the OK idling cycle is completed 40 times in a row
• When "Clear Memory" is performed (Only with engine stopped)
(2)
(3)
Motor
Enable Conditions
ON → OFF
OFF → ON
Threshold Value
10.127° or more,
19.872° or less
≥ 1.683°
GD(STI)-252
(3)
(4)
EN-01869
(4)
Throttle position sensor