Purge Control Valve - SSANGYONG Rexton Y200 Manual

Hide thumbs Also See for Rexton Y200:

Table of Contents

1F2-40 M161 ENGINE CONTROLS

1 Purge Control Valve

2 Line to Engine

The fuel vaporization control system is installed to inhibit the fuel vaporized gas from discharging into the

atmosphere. The fuel vaporized gas that is accumulated in the canister abstracts through the purge control valve

purification during the engine combustion (except the decreasing mode) and coolant temperature of over 80 °C.

For this reason, the Engine Control Module (ECM) transacts the engine speed, air inflow quantity, coolant

temperature, and intake temperature.

The purge control valve is activated by the ECM frequency according with the engine rotating speed to adjust the

purification rate. The purification rate is determined by the continuous valve opening interval.

The purge control valve is activated by the ECM for the following conditions:

Coolant temperature of over 80 °C

Engine speed of over 1,000 rpm

2 minutes after starting

When the fuel cut-off mode is not activated

PURGE CONTROL VALVE

3 Line to Canister

SSANGYONG Y200

Table of Contents