SSANGYONG Rexton Y200 Manual page 1009

Power Flow - Drive 4 Lock Up
In Drive 4 Lock Up, transmission drive is the same as
for Drive 4 but with the application of the converter
lock up clutch to provide positive no-slip converter
drive.
Control
To maintain this arrangement in the steady state sole-
noids and valves are activated as follows;
•
When S7 is switched ON, S7 feed oil to the converter
clutch control valve is switched OFF and allowed
to exhaust through the S7 solenoid. This allows the
valve to move to the clutch engage position.
Gear State
Drive 4 Lock Up
SSANGYONG Y200
C1 C2 C3
X X -
AUTOMATIC TRANSMISSION 5A-37
•
Regulated apply feed oil, drived from drive oil at
the converter clutch regulator valve, is directed by
the converter clutch control valve to the engage side
of the converter clutch.
•
Converter clutch release oil is exhausted at the con-
verter clutch control valve.
•
Converter feed oil is re-routed by the converter clutch
control valve directly to the oil cooler and lubrication
circuit.
ELEMENTS ENGAGED
C4 B1 B2
- X -
1-2 3-4 LU
OWC OWC CLUTCH
- - -
KAA5A480