SSANGYONG Rexton Y200 Manual page 776

SSANGYONG Y200
Inspection
1. Check the shaft spline for the wear and damage.
2. Check the leakage by the boot crack, tears.
3. Check the bending of shaft.
Notice: if the defect happens in one shaft, because
the other is damaged, exchange the both.
YAD3A690
Assembly
1. Assembly should follow the dismantlement in the
reverse order.
2. Apply the specified grease to the joint housing.
Injection quantity
Notice: If not use the specified grease, the joint
and boot may be damaged.
Notice: For assembly, replace the boot clamp with
the new one.
YAD3A700
3. Check the followings after completing the
assembly.
•
Check whether the joint move to up/down, left/
right, forward freely.
•
Check whether the grease leak in the clamp part
after checking the operation.
FRONT AXLE 3A-27
90 - 100 g